Plaza / Official / C0140
Climbing Tower With Slanted Roof And Small Platform
OfficialC0140QUADRO website: From 24 mo

Climbing Tower With Slanted Roof And Small Platform

QUADRO
QUADROOfficial

This official model takes 161 parts, covers 173 × 125 cm, stands 237 cm tall and goes together in 23 steps. The full parts list, step-by-step instructions and the sets that build it are below.

Footprint
173 × 125 cm (2.2 ㎡)
Height
237 cm
Climbable height
80 cm
Parts
161
Manual steps
23
Open in Builder →
Create shared copyAll official models

A factory model, not a recommendation. Judge height, span and rails for your home.

Parts list for Climbing Tower With Slanted Roof And Small Platform

PartCodeQty
Space 5-wayCS53
Space 4-wayCS412
Surface 4-wayCF42
Space 3-wayCS320
Surface 3-wayCF311
ElbowCS27
StraightCF21
45°C454
Tube 15 cmT158
Tube 35 cmT3582
Panel 40×40 cmPA411
Total161

Step-by-step instructions: 23 steps

Build from the bottom up, level by level: first the connectors and tubes of a level, then the uprights to the next one, and panels and fabric once the frame stands. Follow along in 3D →

  1. Step 1 · Level 1: connectors and tubes on the floorSpace 4-way× 1Space 3-way× 11Elbow× 3Straight× 1Tube 35 cm× 15
  2. Step 2 · Uprights up to level 2Tube 15 cm× 4Tube 35 cm× 11
  3. Step 3 · Level 2: connectors and tubes 20 cm upSpace 4-way× 4Tube 35 cm× 4
  4. Step 4 · Uprights up to level 3Tube 15 cm× 4
  5. Step 5 · Level 3: connectors and tubes 40 cm upSpace 5-way× 1Space 4-way× 1Surface 4-way× 1Space 3-way× 7Surface 3-way× 3Elbow× 2Tube 35 cm× 12
  6. Step 6 · Uprights up to level 4Tube 35 cm× 6
  7. Step 7 · Level 4: connectors and tubes 43 cm up45°× 2
  8. Step 8 · Uprights up to level 5Tube 35 cm× 2
  9. Step 9 · Level 5: connectors and tubes 71 cm upSurface 3-way× 3Tube 35 cm× 2
  10. Step 10 · Uprights up to level 6Tube 35 cm× 3
  11. Step 11 · Level 6: connectors and tubes 80 cm upSpace 5-way× 2Space 4-way× 4Tube 35 cm× 7
  12. Step 12 · Uprights up to level 7Tube 35 cm× 6
  13. Step 13 · Level 7: connectors and tubes 100 cm upSurface 3-way× 3Tube 35 cm× 2
  14. Step 14 · Uprights up to level 8Tube 35 cm× 2
  15. Step 15 · Level 8: connectors and tubes 120 cm upSpace 4-way× 2Surface 4-way× 1Space 3-way× 1Surface 3-way× 2Tube 35 cm× 5
  16. Step 16 · Uprights up to level 9Tube 35 cm× 3
  17. Step 17 · Level 9: connectors and tubes 128 cm up45°× 2
  18. Step 18 · Level 11: connectors and tubes 160 cm upSpace 3-way× 1Elbow× 2Tube 35 cm× 2
  19. Step 19 · Level 2: panels and fabricPanel 40×40 cm× 1
  20. Step 20 · Level 3: panels and fabricPanel 40×40 cm× 3
  21. Step 21 · Level 6: panels and fabricPanel 40×40 cm× 3
  22. Step 22 · Level 7: panels and fabricPanel 40×40 cm× 2
  23. Step 23 · Level 8: panels and fabricPanel 40×40 cm× 2

Which set builds it

Any one of these sets is enough on its own, no extra parts needed:

Ultimate

All setsIdeas by age and spaceParts guideAll official models

Xiaomaifang is an independent project run by one person and has no connection with QUADRO DER GROSSBAUKASTEN GmbH. QUADRO is a trademark of its owner and is mentioned only to say which products this tool is meant for. All 3D images on this page are rendered by Xiaomaifang.