Plaza / Official / C0040
Penthouse High Roof Integrated Slide
OfficialC0040QUADRO website: From 24 mo

Penthouse High Roof Integrated Slide

QUADRO
QUADROOfficial

This official model takes 278 parts, covers 333 × 165 cm, stands 226 cm tall and goes together in 24 steps. The full parts list, step-by-step instructions and the sets that build it are below.

Footprint
333 × 165 cm (5.5 ㎡)
Height
226 cm
Climbable height
80 cm
Parts
278
Manual steps
24
Open in Builder →
Create shared copyAll official models

A factory model, not a recommendation. Judge height, span and rails for your home.

Parts list for Penthouse High Roof Integrated Slide

PartCodeQty
Space 5-wayCS54
Space 4-wayCS428
Space 3-wayCS316
Surface 3-wayCF320
ElbowCS217
StraightCF213
45°C458
Tube 15 cmT154
Tube 35 cmT35147
Panel 40×40 cmPA415
Roof1
Integral slide1
Fabric sheet4
Total278

Step-by-step instructions: 24 steps

Build from the bottom up, level by level: first the connectors and tubes of a level, then the uprights to the next one, and panels and fabric once the frame stands. Follow along in 3D →

  1. Step 1 · Level 1: connectors and tubes on the floorSpace 4-way× 9Space 3-way× 11Surface 3-way× 2Elbow× 7Straight× 3Tube 35 cm× 36
  2. Step 2 · Uprights up to level 2Tube 35 cm× 25
  3. Step 3 · Level 2: connectors and tubes 40 cm upSpace 4-way× 9Space 3-way× 3Surface 3-way× 6Elbow× 5Straight× 2Tube 35 cm× 19
  4. Step 4 · Uprights up to level 3Tube 35 cm× 12
  5. Step 5 · Level 3: connectors and tubes 43 cm up45°× 2
  6. Step 6 · Uprights up to level 4Tube 35 cm× 2
  7. Step 7 · Level 4: connectors and tubes 71 cm upSurface 3-way× 3Tube 35 cm× 2
  8. Step 8 · Uprights up to level 5Tube 35 cm× 3
  9. Step 9 · Level 5: connectors and tubes 80 cm upSpace 5-way× 4Space 4-way× 7Surface 3-way× 1Tube 35 cm× 16Integral slide× 1
  10. Step 10 · Uprights up to level 6Tube 35 cm× 7
  11. Step 11 · Level 6: connectors and tubes 100 cm upSurface 3-way× 3Tube 35 cm× 2
  12. Step 12 · Uprights up to level 7Tube 35 cm× 2
  13. Step 13 · Level 7: connectors and tubes 120 cm upSpace 4-way× 3Surface 3-way× 5Elbow× 1Straight× 3Tube 15 cm× 4Tube 35 cm× 7
  14. Step 14 · Uprights up to level 8Tube 35 cm× 4
  15. Step 15 · Level 8: connectors and tubes 128 cm up45°× 2
  16. Step 16 · Level 9: connectors and tubes 160 cm upElbow× 4
  17. Step 17 · Level 10: connectors and tubes 163 cm up45°× 4
  18. Step 18 · Uprights up to level 11Tube 35 cm× 4
  19. Step 19 · Level 11: connectors and tubes 192 cm upStraight× 4
  20. Step 20 · Uprights up to level 12Tube 35 cm× 4
  21. Step 21 · Level 12: connectors and tubes 221 cm upSpace 3-way× 2Straight× 1Tube 35 cm× 2Roof× 1
  22. Step 22 · Level 2: panels and fabricPanel 40×40 cm× 10
  23. Step 23 · Level 5: panels and fabricPanel 40×40 cm× 5Fabric sheet× 2
  24. Step 24 · Level 7: panels and fabricFabric sheet× 2

Which set builds it

No single QUADRO set is enough on its own.

All setsIdeas by age and spaceParts guideAll official models

Xiaomaifang is an independent project run by one person and has no connection with QUADRO DER GROSSBAUKASTEN GmbH. QUADRO is a trademark of its owner and is mentioned only to say which products this tool is meant for. All 3D images on this page are rendered by Xiaomaifang.