Plaza / Official / B0127
Slide And Climbing Ramp For Toddlers
OfficialB0127QUADRO website: From 12 mo

Slide And Climbing Ramp For Toddlers

QUADRO
QUADROOfficial

This official model takes 131 parts, covers 234 × 125 cm, stands 105 cm tall and goes together in 21 steps. The full parts list, step-by-step instructions and the sets that build it are below.

Footprint
234 × 125 cm (2.9 ㎡)
Height
105 cm
Climbable height
60 cm
Parts
131
Manual steps
21
Open in Builder →
Create shared copyAll official models

A factory model, not a recommendation. Judge height, span and rails for your home.

Parts list for Slide And Climbing Ramp For Toddlers

PartCodeQty
Space 4-wayCS412
Space 3-wayCS310
Surface 3-wayCF36
ElbowCS219
StraightCF22
45°C452
Tube 15 cmT1516
Tube 35 cmT3553
Panel 40×40 cmPA49
Double-tubeCDT2
Total131

Step-by-step instructions: 21 steps

Build from the bottom up, level by level: first the connectors and tubes of a level, then the uprights to the next one, and panels and fabric once the frame stands. Follow along in 3D →

  1. Step 1 · Level 1: connectors and tubes on the floorSpace 3-way× 4Surface 3-way× 4Elbow× 8Straight× 1Tube 15 cm× 2Tube 35 cm× 13
  2. Step 2 · Uprights up to level 2Tube 15 cm× 6Tube 35 cm× 4
  3. Step 3 · Level 2: connectors and tubes 3 cm upElbow× 245°× 2Tube 35 cm× 1
  4. Step 4 · Uprights up to level 3Tube 15 cm× 2Tube 35 cm× 2
  5. Step 5 · Level 3: connectors and tubes 20 cm upSpace 4-way× 4Space 3-way× 2Surface 3-way× 2Straight× 1Tube 15 cm× 2Tube 35 cm× 5
  6. Step 6 · Uprights up to level 4Tube 15 cm× 2Tube 35 cm× 4
  7. Step 7 · Level 4: connectors and tubes 31 cm upElbow× 1
  8. Step 8 · Level 5: connectors and tubes 40 cm upSpace 4-way× 4Space 3-way× 2Tube 35 cm× 5
  9. Step 9 · Uprights up to level 6Tube 15 cm× 2Tube 35 cm× 4
  10. Step 10 · Level 6: connectors and tubes 60 cm upSpace 4-way× 4Space 3-way× 2Tube 35 cm× 5
  11. Step 11 · Uprights up to level 7Tube 35 cm× 6
  12. Step 12 · Level 7: connectors and tubes 75 cm upElbow× 2
  13. Step 13 · Uprights up to level 8Tube 35 cm× 2
  14. Step 14 · Level 8: connectors and tubes 95 cm upElbow× 2
  15. Step 15 · Level 9: connectors and tubes 100 cm upElbow× 4Tube 35 cm× 2
  16. Step 16 · Level 3: panels and fabricPanel 40×40 cm× 2
  17. Step 17 · Level 5: panels and fabricPanel 40×40 cm× 2
  18. Step 18 · Level 6: panels and fabricPanel 40×40 cm× 2
  19. Step 19 · Level 8: panels and fabricPanel 40×40 cm× 1
  20. Step 20 · Level 9: panels and fabricPanel 40×40 cm× 2
  21. Step 21 · Finishing: fit the remaining connectors and tube coresDouble-tube× 2

Which set builds it

No single QUADRO set is enough on its own.

Within 8 extra parts:

All setsIdeas by age and spaceParts guideAll official models

Xiaomaifang is an independent project run by one person and has no connection with QUADRO DER GROSSBAUKASTEN GmbH. QUADRO is a trademark of its owner and is mentioned only to say which products this tool is meant for. All 3D images on this page are rendered by Xiaomaifang.