Turbo Slide Tower With Curved Slide

Parts list for Turbo Slide Tower With Curved Slide

Part	Code	Qty
Space 4-way	CS4	8
Space 3-way	CS3	4
Surface 3-way	CF3	7
Elbow	CS2	18
Straight	CF2	6
Tube 10 cm	T10	1
Tube 15 cm	T15	15
Tube 20 cm	T20	1
Tube 25 cm	T25	3
Tube 35 cm	T35	37
Panel 40×40 cm	PA4	6
Curved slide		1
Slide run-out		1
Total		108

Step-by-step instructions: 14 steps

Build from the bottom up, level by level: first the connectors and tubes of a level, then the uprights to the next one, and panels and fabric once the frame stands. Follow along in 3D →

1. Step 1 · Level 1: connectors and tubes on the floorSpace 4-way× 2Space 3-way× 2Surface 3-way× 3Elbow× 12Straight× 2Tube 10 cm× 1Tube 15 cm× 3Tube 20 cm× 1Tube 25 cm× 3Tube 35 cm× 13
2. Step 2 · Uprights up to level 2Tube 15 cm× 4Tube 35 cm× 5
3. Step 3 · Level 2: connectors and tubes 20 cm upSurface 3-way× 2Straight× 2Tube 35 cm× 1
4. Step 4 · Uprights up to level 3Tube 15 cm× 4
5. Step 5 · Level 3: connectors and tubes 40 cm upSpace 4-way× 2Space 3-way× 2Surface 3-way× 2Elbow× 2Tube 35 cm× 6
6. Step 6 · Uprights up to level 4Tube 35 cm× 4
7. Step 7 · Level 5: connectors and tubes 80 cm upSpace 4-way× 4Tube 35 cm× 4Curved slide× 1Slide run-out× 1
8. Step 8 · Uprights up to level 6Tube 15 cm× 2Tube 35 cm× 2
9. Step 9 · Level 6: connectors and tubes 100 cm upStraight× 2
10. Step 10 · Uprights up to level 7Tube 15 cm× 2
11. Step 11 · Level 7: connectors and tubes 120 cm upElbow× 4Tube 35 cm× 2
12. Step 12 · Level 3: panels and fabricPanel 40×40 cm× 3
13. Step 13 · Level 5: panels and fabricPanel 40×40 cm× 1
14. Step 14 · Level 7: panels and fabricPanel 40×40 cm× 2

Which set builds it

No single QUADRO set is enough on its own.

Within 8 extra parts:

• Ultimate: 5 short, Elbow× 1Tube 10 cm× 1Tube 20 cm× 1Curved slide× 1Slide run-out× 1