Plaza / Official / B0062
Toddler Retreat With Ramp
OfficialB0062QUADRO website: From 12 mo

Toddler Retreat With Ramp

QUADRO
QUADROOfficial

This official model takes 170 parts, covers 169 × 165 cm, stands 156 cm tall and goes together in 22 steps. The full parts list, step-by-step instructions and the sets that build it are below.

Footprint
169 × 165 cm (2.8 ㎡)
Height
156 cm
Climbable height
40 cm
Parts
170
Manual steps
22
Open in Builder →
Create shared copyAll official models

A factory model, not a recommendation. Judge height, span and rails for your home.

Parts list for Toddler Retreat With Ramp

PartCodeQty
Space 5-wayCS53
Space 4-wayCS414
Surface 4-wayCF41
Space 3-wayCS315
Surface 3-wayCF312
ElbowCS213
StraightCF22
45°C453
Tube 15 cmT1516
Tube 35 cmT3577
Panel 40×40 cmPA410
Panel 40×20 cmPA22
Double-tubeCDT2
Total170

Step-by-step instructions: 22 steps

Build from the bottom up, level by level: first the connectors and tubes of a level, then the uprights to the next one, and panels and fabric once the frame stands. Follow along in 3D →

  1. Step 1 · Level 1: connectors and tubes on the floorSpace 4-way× 5Space 3-way× 4Surface 3-way× 2Elbow× 5Tube 35 cm× 16
  2. Step 2 · Uprights up to level 2Tube 15 cm× 6Tube 35 cm× 10
  3. Step 3 · Level 2: connectors and tubes 17 cm upElbow× 2
  4. Step 4 · Uprights up to level 3Tube 35 cm× 2
  5. Step 5 · Level 3: connectors and tubes 20 cm upSpace 4-way× 2Space 3-way× 2Surface 3-way× 2Tube 35 cm× 5
  6. Step 6 · Uprights up to level 4Tube 15 cm× 2Tube 35 cm× 2
  7. Step 7 · Level 4: connectors and tubes 37 cm upStraight× 2
  8. Step 8 · Uprights up to level 5Tube 35 cm× 2
  9. Step 9 · Level 5: connectors and tubes 40 cm upSpace 5-way× 3Space 4-way× 7Space 3-way× 2Surface 3-way× 2Tube 15 cm× 4Tube 35 cm× 12
  10. Step 10 · Uprights up to level 6Tube 15 cm× 2Tube 35 cm× 9
  11. Step 11 · Level 6: connectors and tubes 57 cm upElbow× 2
  12. Step 12 · Level 7: connectors and tubes 80 cm upSurface 4-way× 1Space 3-way× 4Surface 3-way× 6Tube 15 cm× 2Tube 35 cm× 8
  13. Step 13 · Uprights up to level 8Tube 35 cm× 5
  14. Step 14 · Level 8: connectors and tubes 120 cm upSpace 3-way× 2Elbow× 3Tube 35 cm× 2
  15. Step 15 · Level 9: connectors and tubes 123 cm up45°× 3
  16. Step 16 · Uprights up to level 10Tube 35 cm× 3
  17. Step 17 · Level 10: connectors and tubes 151 cm upSpace 3-way× 1Elbow× 1Tube 35 cm× 1
  18. Step 18 · Level 3: panels and fabricPanel 40×40 cm× 2Panel 40×20 cm× 2
  19. Step 19 · Level 5: panels and fabricPanel 40×40 cm× 5
  20. Step 20 · Level 7: panels and fabricPanel 40×40 cm× 2
  21. Step 21 · Level 10: panels and fabricPanel 40×40 cm× 1
  22. Step 22 · Finishing: fit the remaining connectors and tube coresDouble-tube× 2

Which set builds it

Any one of these sets is enough on its own, no extra parts needed:

Ultimate

All setsIdeas by age and spaceParts guideAll official models

Xiaomaifang is an independent project run by one person and has no connection with QUADRO DER GROSSBAUKASTEN GmbH. QUADRO is a trademark of its owner and is mentioned only to say which products this tool is meant for. All 3D images on this page are rendered by Xiaomaifang.