Plaza / Official / A0308
Princess Climbing Castle With Ramp
OfficialA0308QUADRO website: From 6 mo

Princess Climbing Castle With Ramp

QUADRO
QUADROOfficial

This official model takes 91 parts, covers 143 × 85 cm, stands 116 cm tall and goes together in 19 steps. The full parts list, step-by-step instructions and the sets that build it are below.

Footprint
143 × 85 cm (1.2 ㎡)
Height
116 cm
Climbable height
20 cm
Parts
91
Manual steps
19
Open in Builder →
Create shared copyAll official models

A factory model, not a recommendation. Judge height, span and rails for your home.

Parts list for Princess Climbing Castle With Ramp

PartCodeQty
Space 4-wayCS47
Space 3-wayCS312
Surface 3-wayCF34
ElbowCS210
StraightCF21
45°C454
Tube 15 cmT1511
Tube 35 cmT3538
Panel 40×40 cmPA42
Double-tubeCDT2
Total91

Step-by-step instructions: 19 steps

Build from the bottom up, level by level: first the connectors and tubes of a level, then the uprights to the next one, and panels and fabric once the frame stands. Follow along in 3D →

  1. Step 1 · Level 1: connectors and tubes on the floorSpace 4-way× 2Space 3-way× 2Surface 3-way× 1Elbow× 3Straight× 1Tube 15 cm× 2Tube 35 cm× 7
  2. Step 2 · Uprights up to level 2Tube 15 cm× 4Tube 35 cm× 3
  3. Step 3 · Level 2: connectors and tubes 5 cm upSpace 3-way× 2Tube 35 cm× 1
  4. Step 4 · Uprights up to level 3Tube 15 cm× 2Tube 35 cm× 2
  5. Step 5 · Level 3: connectors and tubes 20 cm upSpace 4-way× 4Space 3-way× 2Tube 35 cm× 5
  6. Step 6 · Uprights up to level 4Tube 15 cm× 2Tube 35 cm× 4
  7. Step 7 · Level 4: connectors and tubes 23 cm upElbow× 2
  8. Step 8 · Uprights up to level 5Tube 35 cm× 2
  9. Step 9 · Level 5: connectors and tubes 38 cm upElbow× 2
  10. Step 10 · Level 6: connectors and tubes 40 cm upSpace 4-way× 1Surface 3-way× 2Tube 35 cm× 2
  11. Step 11 · Uprights up to level 7Tube 35 cm× 3
  12. Step 12 · Level 7: connectors and tubes 60 cm upSurface 3-way× 1Elbow× 3Tube 35 cm× 2
  13. Step 13 · Uprights up to level 8Tube 15 cm× 1
  14. Step 14 · Level 8: connectors and tubes 80 cm upSpace 3-way× 4Tube 35 cm× 2
  15. Step 15 · Level 9: connectors and tubes 83 cm up45°× 4
  16. Step 16 · Uprights up to level 10Tube 35 cm× 4
  17. Step 17 · Level 10: connectors and tubes 111 cm upSpace 3-way× 2Tube 35 cm× 1
  18. Step 18 · Level 3: panels and fabricPanel 40×40 cm× 2
  19. Step 19 · Finishing: fit the remaining connectors and tube coresDouble-tube× 2

Which set builds it

Any one of these sets is enough on its own, no extra parts needed:

Climbing ParkourEvolutionUltimate

Within 8 extra parts:

All setsIdeas by age and spaceParts guideAll official models

Xiaomaifang is an independent project run by one person and has no connection with QUADRO DER GROSSBAUKASTEN GmbH. QUADRO is a trademark of its owner and is mentioned only to say which products this tool is meant for. All 3D images on this page are rendered by Xiaomaifang.