Plaza / Official / A0178
Tower With Baby Slide And Baby Ballcage
OfficialA0178QUADRO website: From 12 mo

Tower With Baby Slide And Baby Ballcage

QUADRO
QUADROOfficial

This official model takes 253 parts, covers 253 × 233 cm, stands 156 cm tall and goes together in 34 steps. The full parts list, step-by-step instructions and the sets that build it are below.

Footprint
253 × 233 cm (5.9 ㎡)
Height
156 cm
Climbable height
40 cm
Parts
253
Manual steps
34
Open in Builder →
Create shared copyAll official models

A factory model, not a recommendation. Judge height, span and rails for your home.

Parts list for Tower With Baby Slide And Baby Ballcage

PartCodeQty
Space 5-wayCS53
Space 4-wayCS422
Surface 4-wayCF42
Space 3-wayCS320
Surface 3-wayCF313
ElbowCS216
StraightCF26
45°C458
Tube 15 cmT1528
Tube 25 cmT254
Tube 35 cmT3595
Panel 70×120 cmP7C2
Panel 40×40 cmPA416
Panel 40×20 cmPA214
Tube core 80 cmRV82
Double-tubeCDT2
Total253

Step-by-step instructions: 34 steps

Build from the bottom up, level by level: first the connectors and tubes of a level, then the uprights to the next one, and panels and fabric once the frame stands. Follow along in 3D →

  1. Step 1 · Level 1: connectors and tubes on the floorSpace 5-way× 2Space 4-way× 8Surface 4-way× 2Space 3-way× 8Elbow× 4Tube 35 cm× 29
  2. Step 2 · Uprights up to level 2Tube 15 cm× 18Tube 35 cm× 6Tube core 80 cm× 1
  3. Step 3 · Level 2: connectors and tubes 17 cm upElbow× 2
  4. Step 4 · Uprights up to level 3Tube 35 cm× 2
  5. Step 5 · Level 3: connectors and tubes 20 cm upSpace 5-way× 1Space 4-way× 10Space 3-way× 2Surface 3-way× 5Tube 35 cm× 18
  6. Step 6 · Uprights up to level 4Tube 15 cm× 5Tube 35 cm× 7Tube core 80 cm× 1
  7. Step 7 · Level 4: connectors and tubes 37 cm upSurface 3-way× 2
  8. Step 8 · Uprights up to level 5Tube 35 cm× 2
  9. Step 9 · Level 5: connectors and tubes 40 cm upSpace 4-way× 4Space 3-way× 3Surface 3-way× 1Elbow× 1Tube 35 cm× 7
  10. Step 10 · Uprights up to level 6Tube 15 cm× 4Tube 35 cm× 3
  11. Step 11 · Level 6: connectors and tubes 57 cm upElbow× 2
  12. Step 12 · Level 7: connectors and tubes 60 cm upSpace 3-way× 1Surface 3-way× 1Elbow× 5Tube 35 cm× 2
  13. Step 13 · Uprights up to level 8Tube 15 cm× 1
  14. Step 14 · Level 8: connectors and tubes 63 cm up45°× 4
  15. Step 15 · Uprights up to level 9Tube 35 cm× 4
  16. Step 16 · Level 9: connectors and tubes 80 cm upSurface 3-way× 4Tube 35 cm× 2
  17. Step 17 · Uprights up to level 10Tube 35 cm× 4
  18. Step 18 · Level 10: connectors and tubes 90 cm upStraight× 4
  19. Step 19 · Uprights up to level 11Tube 25 cm× 4
  20. Step 20 · Level 11: connectors and tubes 111 cm upSpace 3-way× 2Straight× 2Tube 35 cm× 3
  21. Step 21 · Level 12: connectors and tubes 120 cm upSpace 3-way× 2Elbow× 2Tube 35 cm× 1
  22. Step 22 · Level 13: connectors and tubes 123 cm up45°× 4
  23. Step 23 · Uprights up to level 14Tube 35 cm× 4
  24. Step 24 · Level 14: connectors and tubes 151 cm upSpace 3-way× 2Tube 35 cm× 1
  25. Step 25 · Level 1: panels and fabricPanel 40×40 cm× 7
  26. Step 26 · Level 3: panels and fabricPanel 40×40 cm× 3Panel 40×20 cm× 10
  27. Step 27 · Level 4: panels and fabricPanel 40×20 cm× 2
  28. Step 28 · Level 5: panels and fabricPanel 40×40 cm× 2
  29. Step 29 · Level 6: panels and fabricPanel 40×20 cm× 2
  30. Step 30 · Level 7: panels and fabricPanel 40×40 cm× 2
  31. Step 31 · Level 9: panels and fabricPanel 40×40 cm× 1
  32. Step 32 · Level 11: panels and fabricPanel 70×120 cm× 2
  33. Step 33 · Level 14: panels and fabricPanel 40×40 cm× 1
  34. Step 34 · Finishing: fit the remaining connectors and tube coresDouble-tube× 2

Which set builds it

No single QUADRO set is enough on its own.

Within 8 extra parts:

All setsIdeas by age and spaceParts guideAll official models

Xiaomaifang is an independent project run by one person and has no connection with QUADRO DER GROSSBAUKASTEN GmbH. QUADRO is a trademark of its owner and is mentioned only to say which products this tool is meant for. All 3D images on this page are rendered by Xiaomaifang.