Climbing Frame With Long Ramp

Parts list for Climbing Frame With Long Ramp

Part	Code	Qty
Space 4-way	CS4	8
Space 3-way	CS3	4
Surface 3-way	CF3	4
Elbow	CS2	14
Straight	CF2	2
Tube 15 cm	T15	10
Tube 35 cm	T35	34
Panel 40×40 cm	PA4	8
Double-tube	CDT	2
Total		86

Step-by-step instructions: 18 steps

Build from the bottom up, level by level: first the connectors and tubes of a level, then the uprights to the next one, and panels and fabric once the frame stands. Follow along in 3D →

1. Step 1 · Level 1: connectors and tubes on the floorSpace 3-way× 2Surface 3-way× 2Elbow× 4Tube 35 cm× 5
2. Step 2 · Uprights up to level 2Tube 15 cm× 6Tube 35 cm× 4
3. Step 3 · Level 2: connectors and tubes 17 cm upElbow× 2
4. Step 4 · Uprights up to level 3Tube 35 cm× 2
5. Step 5 · Level 3: connectors and tubes 20 cm upSpace 4-way× 4Surface 3-way× 2Tube 35 cm× 5
6. Step 6 · Uprights up to level 4Tube 15 cm× 2Tube 35 cm× 4
7. Step 7 · Level 4: connectors and tubes 37 cm upStraight× 2
8. Step 8 · Uprights up to level 5Tube 35 cm× 2
9. Step 9 · Level 5: connectors and tubes 40 cm upSpace 4-way× 4Space 3-way× 2Tube 35 cm× 5
10. Step 10 · Uprights up to level 6Tube 15 cm× 2Tube 35 cm× 4
11. Step 11 · Level 6: connectors and tubes 57 cm upElbow× 2
12. Step 12 · Level 7: connectors and tubes 60 cm upElbow× 2Tube 35 cm× 1
13. Step 13 · Level 8: connectors and tubes 80 cm upElbow× 4Tube 35 cm× 2
14. Step 14 · Level 3: panels and fabricPanel 40×40 cm× 2
15. Step 15 · Level 5: panels and fabricPanel 40×40 cm× 3
16. Step 16 · Level 7: panels and fabricPanel 40×40 cm× 1
17. Step 17 · Level 8: panels and fabricPanel 40×40 cm× 2
18. Step 18 · Finishing: fit the remaining connectors and tube coresDouble-tube× 2

Which set builds it

Any one of these sets is enough on its own, no extra parts needed:

AdventureAdventure+Ultimate

Within 8 extra parts:

• Furniture Kit L: 7 short, Elbow× 1Panel 40×40 cm× 4Double-tube× 2
• Evolution: 2 short, Elbow× 2