My First Castle With Ramp

Parts list for My First Castle With Ramp

Part	Code	Qty
Space 4-way	CS4	7
Space 3-way	CS3	4
Surface 3-way	CF3	4
Elbow	CS2	14
Straight	CF2	1
45°	C45	4
Tube 15 cm	T15	7
Tube 35 cm	T35	34
Panel 40×40 cm	PA4	8
Double-tube	CDT	2
Total		85

Step-by-step instructions: 18 steps

Build from the bottom up, level by level: first the connectors and tubes of a level, then the uprights to the next one, and panels and fabric once the frame stands. Follow along in 3D →

1. Step 1 · Level 1: connectors and tubes on the floorSpace 4-way× 2Space 3-way× 2Surface 3-way× 1Elbow× 5Straight× 1Tube 15 cm× 2Tube 35 cm× 8
2. Step 2 · Uprights up to level 2Tube 15 cm× 4Tube 35 cm× 5
3. Step 3 · Level 2: connectors and tubes 20 cm upSpace 4-way× 4Elbow× 2Tube 35 cm× 5
4. Step 4 · Uprights up to level 3Tube 35 cm× 4
5. Step 5 · Level 3: connectors and tubes 40 cm upSpace 4-way× 1Surface 3-way× 2Tube 35 cm× 2
6. Step 6 · Uprights up to level 4Tube 35 cm× 3
7. Step 7 · Level 4: connectors and tubes 60 cm upSurface 3-way× 1Elbow× 3Tube 35 cm× 2
8. Step 8 · Uprights up to level 5Tube 15 cm× 1
9. Step 9 · Level 5: connectors and tubes 80 cm upElbow× 4
10. Step 10 · Level 6: connectors and tubes 83 cm up45°× 4
11. Step 11 · Uprights up to level 7Tube 35 cm× 4
12. Step 12 · Level 7: connectors and tubes 111 cm upSpace 3-way× 2Tube 35 cm× 1
13. Step 13 · Level 1: panels and fabricPanel 40×40 cm× 1
14. Step 14 · Level 2: panels and fabricPanel 40×40 cm× 2
15. Step 15 · Level 3: panels and fabricPanel 40×40 cm× 2
16. Step 16 · Level 4: panels and fabricPanel 40×40 cm× 1
17. Step 17 · Level 7: panels and fabricPanel 40×40 cm× 2
18. Step 18 · Finishing: fit the remaining connectors and tube coresDouble-tube× 2

Which set builds it

Any one of these sets is enough on its own, no extra parts needed:

AdventureAdventure+Ultimate

Within 8 extra parts:

• Evolution: 2 short, Elbow× 2