Quadro Locomotive

Parts list for Quadro Locomotive

Part	Code	Qty
Space 5-way	CS5	2
Space 4-way	CS4	8
Surface 4-way	CF4	2
Space 3-way	CS3	4
Surface 3-way	CF3	2
Elbow	CS2	2
45°	C45	4
Tube 15 cm	T15	2
Tube 35 cm	T35	32
Panel 40×40 cm	PA4	4
Steering lock		4
Multi wheel		4
Wheel bearing	CBR	4
Total		74

Step-by-step instructions: 13 steps

Build from the bottom up, level by level: first the connectors and tubes of a level, then the uprights to the next one, and panels and fabric once the frame stands. Follow along in 3D →

1. Step 1 · Level 1: connectors and tubes on the floor45°× 2
2. Step 2 · Uprights up to level 2Tube 35 cm× 2
3. Step 3 · Level 2: connectors and tubes 8 cm upSpace 5-way× 2Space 4-way× 4Tube 35 cm× 7Steering lock× 4Multi wheel× 4Wheel bearing× 4
4. Step 4 · Uprights up to level 3Tube 35 cm× 6
5. Step 5 · Level 3: connectors and tubes 28 cm upSpace 3-way× 2Tube 35 cm× 1
6. Step 6 · Uprights up to level 4Tube 35 cm× 2
7. Step 7 · Level 4: connectors and tubes 48 cm upSpace 4-way× 4Surface 4-way× 2Tube 35 cm× 6
8. Step 8 · Uprights up to level 5Tube 35 cm× 4
9. Step 9 · Level 5: connectors and tubes 57 cm up45°× 2
10. Step 10 · Level 6: connectors and tubes 88 cm upSpace 3-way× 2Surface 3-way× 2Elbow× 2Tube 15 cm× 2Tube 35 cm× 4
11. Step 11 · Level 2: panels and fabricPanel 40×40 cm× 2
12. Step 12 · Level 4: panels and fabricPanel 40×40 cm× 1
13. Step 13 · Level 5: panels and fabricPanel 40×40 cm× 1

Which set builds it

Any one of these sets is enough on its own, no extra parts needed:

Basic

Within 8 extra parts:

• Evolution: 7 short, Surface 4-way× 1Steering lock× 2Multi wheel× 2Wheel bearing× 2