Plaza / Official / A0039
Ramp For Climbers
OfficialA0039QUADRO website: From 12 mo

Ramp For Climbers

QUADRO
QUADROOfficial

This official model takes 75 parts, covers 144 × 85 cm, stands 82 cm tall and goes together in 19 steps. The full parts list, step-by-step instructions and the sets that build it are below.

Footprint
144 × 85 cm (1.2 ㎡)
Height
82 cm
Climbable height
77 cm
Parts
75
Manual steps
19
Open in Builder →
Create shared copyAll official models

A factory model, not a recommendation. Judge height, span and rails for your home.

Parts list for Ramp For Climbers

PartCodeQty
Space 5-wayCS52
Space 4-wayCS47
Space 3-wayCS36
Surface 3-wayCF38
ElbowCS24
Tube 35 cmT3544
Panel 40×40 cmPA43
Fabric sheet1
Total75

Step-by-step instructions: 19 steps

Build from the bottom up, level by level: first the connectors and tubes of a level, then the uprights to the next one, and panels and fabric once the frame stands. Follow along in 3D →

  1. Step 1 · Level 1: connectors and tubes on the floorSpace 3-way× 2Elbow× 1Tube 35 cm× 1
  2. Step 2 · Uprights up to level 2Tube 35 cm× 6
  3. Step 3 · Level 2: connectors and tubes 1 cm upSurface 3-way× 1Elbow× 2Tube 35 cm× 2
  4. Step 4 · Uprights up to level 3Tube 35 cm× 3
  5. Step 5 · Level 3: connectors and tubes 13 cm upSpace 4-way× 2Surface 3-way× 1Tube 35 cm× 1
  6. Step 6 · Uprights up to level 4Tube 35 cm× 6
  7. Step 7 · Level 4: connectors and tubes 26 cm upSurface 3-way× 3
  8. Step 8 · Uprights up to level 5Tube 35 cm× 6
  9. Step 9 · Level 5: connectors and tubes 38 cm upSpace 3-way× 2Elbow× 1Tube 35 cm× 1
  10. Step 10 · Uprights up to level 6Tube 35 cm× 3
  11. Step 11 · Level 6: connectors and tubes 39 cm upSurface 3-way× 3
  12. Step 12 · Uprights up to level 7Tube 35 cm× 3
  13. Step 13 · Level 7: connectors and tubes 51 cm upSpace 5-way× 1Space 4-way× 2Tube 35 cm× 2
  14. Step 14 · Uprights up to level 8Tube 35 cm× 3
  15. Step 15 · Level 8: connectors and tubes 64 cm upSpace 5-way× 1Space 4-way× 2Tube 35 cm× 2
  16. Step 16 · Uprights up to level 9Tube 35 cm× 3
  17. Step 17 · Level 9: connectors and tubes 77 cm upSpace 4-way× 1Space 3-way× 2Tube 35 cm× 2
  18. Step 18 · Level 7: panels and fabricPanel 40×40 cm× 1
  19. Step 19 · Level 9: panels and fabricPanel 40×40 cm× 2Fabric sheet× 1

Which set builds it

Any one of these sets is enough on its own, no extra parts needed:

StarterBasicOffroadJuniorUniversal

Within 8 extra parts:

All setsIdeas by age and spaceParts guideAll official models

Xiaomaifang is an independent project run by one person and has no connection with QUADRO DER GROSSBAUKASTEN GmbH. QUADRO is a trademark of its owner and is mentioned only to say which products this tool is meant for. All 3D images on this page are rendered by Xiaomaifang.